• 25 or 60 second product choices to fit your needs
• 50ml and 220ml cartridge sizes
• Easy to remove twist off top (50ml size)
• Quick leverage top (220ml size)
• 220ml threaded tips that eliminate tip blow outs
• Convenient & portable
• No need to store the product in special chemical cabinets in far away room
• All +PLUSeries™ adhesives are temperature stable, meaning storage in heat or cold will not affect the dispensed product
• Extremely resistant to moisture
• Two-year shelf life
• Non-compressive and machine able making it extremely tough and durable
• Virtually odor free
• VOC Free
• Ships non-hazardous (ORMD)
Engineered To Exceed Your Expectations. Fabtech Systems +PLUSeries™ 25 and 60-second structural urethane adhesives are a versatile and fast two part urethane system used for bonding and repairing plastics, composites, aluminum, steel, plaster and pretty much anything you can think of commonly used in the O&P manufacturing process. Since it’s a structural adhesive, it is exceptionally stronger than brittle, fracture prone acrylics commonly used in our industry today. These urethanes are so strong you can even drill and tap them! We’re confident you’ll never want to use smelly toxic acrylics again.
Get More Than You Asked For. Fabtech Systems +PLUSeries™ urethane adhesives are engineered to save professionals time and money while providing the best possible end result. Our +PLUSeries™ adhesives cut out 95% of process and working times commonly associated with current acrylic adhesives. Best of all, +PLUSeries™ adhesives have low to no odor and can be used anywhere in your facility.
Faster. Stronger. Better. Compared to most commonly used acrylics that require time consuming preparation - Such as gathering needed materials, measuring in additives such as thickening agents and promoters, +PLUSeries™ cartridge adhesives simply require adding new dispensing tips. Chosse between 25 to 60 seconds and you’re ready to go. It’s that easy!
A Higher Degree of Performance and Ease. If you are tired of managing sticky, messy, smelly large cans of acrylic resin? So are we! Simply load a 50 or 220ml adhesive cartridge into the appropriate dispensing gun, twist off the cap, insert a static mixing tip and apply the adhesive where you need it with no dripping or running.
Sample Uses:
• Attaching check sockets to block or alignment fixtures
• Repairing cracks in check sockets
• Sealing a seam on a drape-formed check socket
• Building up the outside of check sockets or existing sockets when a relief would cut through the socket wall
• Repairing a cracked composite socket utilizing carbon or fiberglass using the glue as a matrix
• Repairing a broken plaster cast
• CAD foam applications
• Building up a popliteal trim line on a BK for diagnostic fitting
• Creating flares on check sockets or socket trim lines
• Attaching side joints to check sockets or first lamination for a side joint and thigh lacer BK
• Attaching many styles of ankle and knee joints for fabrication
• Attaching a terminal device to an upper extremity check socket for trial
• Any application that requires the use of traditional acrylics or “gunk”
